Finder Tools
P-System introduction
Advantages of the P-System
The P‐System connectors Clamex P, Tenso P and Divario P can be easily integrated with digital planning and milled into the workpieces with CNC machining technology. Whether nesting or console CNC machines with 3, 4 or 5 axes, our CNC partners offer optimal solutions for milling the P‐System profile groove.
Milling methods for the P‐System
Profile groove in the edge with a P‐System groove cutter
Profile groove in the middle of the surface with the P‐System CNC groove cutter and an angle aggregate
Profile groove in the middle of the surface with the P‐System CNC shaft tool and a 5‐axis movement
Lamello recommends making all profile grooves with a disc cutter, primarily for reasons of precision, durability, milling time and economic efficiency. A shaft tool or contour miller cutter should only be used for the milling of surfaces if no angle aggregate is available.
Profile groove in the middle of the surface with the P‐System CNC shaft tool and a 3‐axis movement
Lamello recommends making all profile grooves with a disc cutter, primarily for reasons of precision, durability, milling time and economic efficiency. A shaft tool or contour miller cutter should only be used for the milling of surfaces if no angle aggregate is available.
Profile groove in the mitre with P-System cutter and an aggregate or with a 5-axis movement
«An aesthetic solution and a saving on time thanks to the P-System from Lamello»
Marco Blaser, CNC machine operator and deputy
workshop manager, Stuber Team AG, Rotkreuz