Planning and processing partners

2020 Technologies
323 Chemin des Plaines
FR-06372 Mouans-Sartoux

www.2020spaces.com

Software for efficient planning of Lamello products

Vero Software GmbH
Borchersstraße 20
DE-52072 Aachen

www.licom-alphacam.com

CAM software for efficient planning of Lamello products

P-System macros

• Profile groove for P-10 and P14
• Graphic illustration
• Graphic simulation of machining
• Profile groove must be positioned individually
• Free download: P-System Macro
• Tested for WOP and ISO controller

P-System macro enables:

• Surface connections
• 90° corner connections
• Bisecting mitres in a vast range of angles
• Right-angled mitres in a vast range of angles
• Machining possible with P-System disc cutter and shaft tool

Cabineo Macros

• Machining as 3x drill holes or cuts
• Graphic illustration
• Graphic simulation of machining
• No automatic positioning of counterbore
• Machining must be positioned individually
• Free download

Vero Software Limited
3800 Palisades Drive
US-35405 Tuscaloosa, AL

www.cabinetvision.com

P-System

Integrated as of Version 10:

• Clamex P-14
• Clamex P-10
• Clamex P-14-10 Medius
• Tenso P-14
• Divario P-18

The following joints are possible: butt joints, end to end and mitres in all angles

Cabineo

Integrated as of Version 10:

• Cabineo 8
• Cabineo 12

CAD+T Consulting GmbH
Gewerbepark 16
AT-4052 Ansfelden

www.cadt-solutions.com

Software for efficient planning of Lamello products

Cadwork SA
Route du Devin 2

CH-1623 Semsales

http://www.cadwork.com/indexL1a.jsp

2D / 3D CAD Software for the efficient planning of Lamello products

P-System connectors/machining

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for Tenso P-14
• Connector and profile groove/hole for Tenso Divario P-18
• The connector can be positioned individually
• Visualisation in graphs

P-System generator for automatic positioning

• Number of connectors and distribution
• Choosing the right connector size
• Positioning within the panel thickness
• Assessing the interior angle
• Visualisation in graphs
• Surface connections 
• 90° corner connections
• Angle bisector mitres at a huge range of angles
• Obtuse-angled mitres at a huge range of angles
• From version 23
• Data export as BTL / SAT / DXF

P-System machining

• Triggering the macros provided by the CNC manufacturer
• The macros on the CNC machine determine the possibilities
• Machining possible with the P-System disc cutter

Cabineo connectors/machining 

• Connector and machining for Cabineo 8 + 12 
• as a triple hole
• The connector can be positioned individually
• Visualisation in graphs

Cabineo generator for automatic positioning

• Number of connectors and distribution
• Choosing the right connector size
• Positioning within the panel thickness
• Visualisation in graphs
• Surface connections
• 90° corner connections
• From version 23
• Data export as BTL / SAT / DXF

DDX SRL
Via G. Donizetti 109/111
IT-24030 Brembate di Sopra

www.ddxgroup.com/

EasyWOOD is a CAD/CAM touch software for woodworking

• All functions can be selected easily and "at a click", this makes it easy to get started with the application
• All aspects of design and machining with 3-, 4- and 5-axis CNC machines are covered. The required modules/functions can be selected individually as needed
• The CAD function contains a library for parametric shapes, also allows 3D modelling and vectorisation of images
• For parametric design and machining, the Lamello P-System connectors and the Cabineo have been integrated

EasyWOOD Nest contains extensive functions for 3-axis milling, versatile nesting methods, generation of labels with barcode as well as stock and remnant management.

• Also available is collision detection with the 3D graphics simulator, optimisation of tool machining paths and a function for generating machine program code
• Import formats: IGES, STL, STEP, SAT, SKP, RHINO (3DM), DXF, CAL, HPGL, PNT
• Cooperation with: NcHops, Maestro, Xylog, Biesseworks, BSolid, MasterAT, MasterWorks, Format4, WoodWOP, TPA Editor, Albatros

CABINET is the ideal software solution for furniture design and interior design. (there is a cooperation with Pytha) 

HOMAG Holzbearbeitungssysteme GmbH
Homagstrasse 3 – 5
DE-72296 Schopfloch

www.homag.com

Homag cabinetCreator:

• Furniture configurator and interface to WoodWOP
• App for every device with an Internet browser
• 3D CAD with 2D display
• A selection of predefined basic shapes can be used in the design
• The iFurn cloud service can be used to import and use fitting data, e.g. for the Lamello P-System connectors and Cabineo
• The generated data can be transferred directly to Homag WoodWOP, cutting or nesting programs 

Vidoeo-Tutorial Software cabinetCreator (YouTube Link)

iFurn GmbH
Planckstraße 24
DE-32052 Herford

www.ifurn.net

Product data services for furniture construction and manufacturing

• Interface between the supplier and furniture builder
• Cloud service tailored to the needs of the furniture industry
• The supplied data can be used in online catalogues, configurators, and CAD/CAM solutions.

Data availability & quality

• Supplies data including visualisation and machining information.
• Only standardised, verified data from the supplier (manufacturer).
• Integrated solutions, available for a wide range of software solutions*
• Cloud availability, 24/7/365, always up-to-date

* based on software technology from imos AG

imos AG
Planckstraße 24
DE-32052 Herford

www.imos3d.com

3D CAD software

P-System connectors/machining

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for Tenso P-14
• Connector and profile groove/hole for Tenso Divario P-18
• The connector can be positioned individually
• Visualisation in graphs

P-System generator for automatic positioning

• Number of connectors and distribution
• Choosing the right connector size
• Positioning within the panel thickness
• Assessing the interior angle
• Visualisation in graphs
• Surface connections
• 90° corner connections
• Angle bisector mitres at a huge range of angles
• Obtuse-angled mitres at a huge range of angles
• From imos iX 2017

P-System machining

• Triggering the macros provided by the CNC manufacturer
• The macros on the CNC machine determine the possibilities
• Machining possible with the P-System disc cutter
• Interface for Wop and ISO controls

Cabineo connectors/machining

• Connector and machining for Cabineo 8 + 12
• As a triple hole
• The connector can be positioned individually
• Visualisation in graphs

Cabineo generator for automatic positioning

• Number of connectors and distribution
• Choosing the right connector size
• Positioning within the panel thickness
• Visualisation in graphs
• Surface connections
• 90° corner connections
• From imos iX 2017

Cabineo machining

• The triple hole and counter-hole can be machined without a macro through the use of a post-processor
• Interface for Wop and ISO controls

KCD Software
Unified Global Technologies
1252 Route 28
US-02664 South Yarmouth, MA

kcdsoftware.com

P-System

Integrated as of Version 10:

• Clamex P-14
• Tenso P-14

Cabineo

Integrated as of Version 10:

• Cabineo 8
• Cabineo 12

Lignocam Sa
Chemin des Arquebusiers 16
CH-1800 Vevey

www.lignocam.com

CAM software

P-System machining

• Profile groove for P-10, P-14, Medius P-14/10, Divario P
• Hole for Clamex P
• The profile groove needs to be positioned individually
• Interface with ISO controls

P-System machining made possible:

• Surface connections
• 90° corner connections
• Angle bisector mitres at a huge range of angles
• Obtuse-angled mitres at a huge range of angles
• Machining possible with the P-System disc cutter

Cabineo machining

• Machining as a triple hole or groove
• No automatic counter-hole positioning
• The machining needs to be positioned individually

Microvellum
444 S Haskell St #3603
OR 97502 Central Point

microvellum.com

Ultimate Customizable CAD/CAM Platform for Woodworkers

Microvellum offers a platform for processing orders with the functions of design, drafting, calculation, construction, production and reporting. The extensive software modules cover the needs of small to large established manufacturers. The design and construction are based on the integrated Microvellum product library (with AutoCAD's Autodesk technology), which is constantly being expanded.

The rendering program creates images of entire rooms or individual products for presentations or prototypes, and construction is handled by an integrated parametric logic. This automatically adjusts the number, positioning and distribution of connectors when the cabinet dimensions change. 2D drawings are also possible. Microvellum has integrated the P-System connectors, the alternative positioning drill holes for creating the profile grooves with the Zeta P2 and all installation variants of the Cabineo connector for Lamello customers.

The calculation module can be used to determine the production times as well as the material and wage costs of the orders. For production, the program generates the material and cutting lists and the CNC machine codes. The integrated CAD/CAM includes an easy-to-use toolset for programming individual parts for CNC machining.

direkt cnc-systeme gmbh
Erich-Klink-Straße 11
D-73553 Alfdorf- Bonholz

www.direkt.net

CAM software for efficient planning of Lamello products

P-System macros

• Profile groove for P-10, P14, Medius P-14/10, Divario P
• Drill hole for Clamex P
• Profile groove must be individually positioned
• Graphic illustration
• Graphic simulation of machining
• For use on Holzher, Biesse, SCM, Mack, Reichenbacher, from WoodWop 7 Homag, Weeke
• From NC-Hops 5, partial functions
• All functions from NC-Hops 7 (additional charge)

P-System enabled:

• Surface connections
• 90° corner connections
• Bisecting mitres in a vast range of angles
• Right-angled mitres in a vast range of angles
• Machining possible with P-System disc cutter and shaft tool

Cabineo macros

• Customer can store 3x hole in program memory

OS Datensysteme GmbH
Am Erlengraben 5
DE-76275 Ettlingen

www.osd.de

ERP (Enterprise Resource Planning)

•    P-System connectors and Cabineo integrated in ERP

2D / 3D CAD Software

P-System Connector / Processing
•    Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
•    Connector and profile groove for für Tesno P-14
•    Connector and profile groove for / Bohrung für Divario P-18
•    Visualisation in graphs

P-System generator for automatic positioning
•    Number of connectors and distribution
•    Positioning in the plate thickness 
•    Visualisation in graphs
•    90° corner connections
•    Bisecting mitres in a vast range of angles
•    Dull mites in various angles
•    From version 10.0

 P-system processing 
•    Control of the macros from the CNC manufacturer 
•    The macros on the CNC machine determines the possibilities
•    Machining is possible with P-System disc cutter 
•    Interface with Wop

Cabineo Connector / Processing
•    Connector and processing for Cabineo 8 + 12
•    As a 3-hole drill 
•    As a groove with an exterior contour
•    Visualisation in graphs

Cabineo Generator for automatic positioning
•    Number of connectors and distribution
•    Choice of correct connector size
•    Positioning in the plate thickness
•    Visualisation in graphs
•    90° corner connections
•    From version 10.0

Cabineo Processing:
•    Interface with Wop
 

Palette CAD AG
Behlesstraße 9-11
DE-70329 Stuttgart

www.palettecad.com

Available Language: German

Palette CAD: «Furniture-making software from wood professionals for wood professionals»

• Palette CAD is a planning software solution for the entire process: from digital measurement to data transfer to the CNC machine
• Planning is carried out using the drag & drop function; the product catalogues of the fittings or wood-based material providers, for example, can be made available via the import and export interfaces
• Using an intelligent configurator, the Lamello Cabineo, for example, can be automatically positioned in the workpieces with the preconfigured rules. Free design and positioning are however also possible
• The software solution also offers e-shop connections for direct product and material orders
• A dedicated cloud technology enables flexible access to data, from anywhere at any time
• With the 3D online planner, interested end customers can try out their own initial ideas from home
• High-end photo realism or virtual reality with animations can be used for the customer presentation
• Palette CAM forms the interface between planning and production and transfers the CAD data directly to the CNC machines

PinnCalc GmbH
Norderstraße 8
DE-24340 Eckernförde

www.p-s-s.de

PinnCalc «Software & Service ganz nach Bedarf»

• Die ERP-Software P123 Corpora deckt alle relevanten Arbeitsschritte in der Auftragsabwicklung vom Angebot bis zum Zahlungseingang ab
• Es wird eine auf die Kundenbedürfnisse zugeschnittene individuelle Lösung umgesetzt
• Die ERP Software umfasst eine Vollintegration von TrunCAD und Top Solid und beinhaltet Schnittstellen zu der CAD Software von Cobus NCAD, imos, PaletteCAD, Pytha, SmartWOP und VectorWorks
• Die P-System Verbinder, die 4mm Holzlamellen oder der Lamello Cabineo werden aus der CAD Software ins ERP übernommen und stehen dann zur Verfügung, bzw. werden zugeordnet
• Die CAD/CAM P305 Software ist die Schnittstelle zu allen gängigen CNC Programmier-Systemen wie WoodWOP, NC-HOPS, Maestro, XILOG, TPA, Genesis, Gannomat Editor, Masterworks, NCAD /xml, IMAWop /xml, Biesse Works

BORM-INFORMATIK AG
Schlagstrasse 135
Postfach 58
CH-6431 Schwyz

www.pointline.swiss

2D/3D CAD software

P-System connectors/machining

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for Tenso P-14
• Connector and profile groove/hole for Tenso Divario P-18
• Visualisation in graphs
• Connector integrated into an ERP solution from Borm
• The connector needs to be positioned individually

P-System machining

• Interface with Wop

 Cabineo connectors/machining

• Connector and machining for Cabineo 8 + 12
• The connector needs to be positioned individually
• As a groove with an exterior contour
• Visualisation in graphs

Cabineo machining:

• Interface with Wop

PYTHA Lab GmbH
Inselstr. 3
DE-63743 Aschaffenburg

www.pytha.com

3D CAD Software

P-System connectors / machining

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for Tenso P-14
• Connector and profile groove/hole for Tenso Divario P-18
• Visualisation in graphs

P-System generator for automatic positioning

• Number of connectors and distribution
• Positioning in the plate thickness
• Visualisation in graphs
• Surface connections
• 90° corner connections
• Angle bisector mitres 2x45°
• From version 24

P-System machining

• Triggering the macros provided by the CNC manufacturer
• The macros on the CNC machine determine the possibilities
• Machining possible with the P-System disc cutter
• Interface for Wop

Cabineo connectors/machining

• Connector and machining for Cabineo 8 + 12
• As a triple hole
• The connector can be positioned individually
• Visualisation in graphs

Cabineo generator for automatic positioning

• Positioning within the panel thickness
• Visualisation in graphs
• 90° corner connections
• From version 23

RSO Group
Rastenfeld 173
AT- 3532 Rastenfeld

https://rso.group/

RSO Group - Ideas are born in the mind, furniture with RSO-CAD

rwdm
René Wetzstein
alte Aescherstr. 25

CH-5615 Fahrwangen

www.rwdm.ch

Datenmanagement for carpenters 

• Data build-up and hardware automation based on CAD + T
• Database with over 4'000 hardware stores growing (as of April 2020)
  • >95% fully automatically generated in plan
  • CNC and ComNorm compatible (ComNorm across ERP)
• Cabinet-, kitchen-, pedestal-, Beistoss- und Blenden-Model
  • Finished CNC programs also for custom-made products
  • Automatic parts list, hardware list

P-System, possibilities with CAD+T

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for für Tenso P-14/10
• Connector and profile groove for / Bohrung für Divario P-18
• Connector can be positioned individually
• Automatic positioning possible
• The CNC machine determines the processing options
• Parts list possible

Cabineo, possibilities with CAD+T

• Connector and machining for Cabineo 8 + 12
• Covercap for Cabineo
• As a triple hole
• As a groove with an exterior contour
• The connector can be positioned individually
• Automatic positioning possible
• The CNC machine determines the processing options
• Parts list possible

Kosmosoft Engineering S.r.l.
Via Franklin Vivenza 64
IT-46100 Mantova MN 

www.kosmosoft.eu

SmartCabinet : "The ultimate planning software for your mobile phone"

• A single solution for parametric 3D design, rendering, quotations, cost analysis (materials/times), cutting optimisation, CNC management (ISO and WOP) as well as production planning, warehouse management, managing supplier orders and tracking production progress
• Intuitive interface
• Parametric rules enable the design of carcass and cabinet units to be set up quickly and easily from the ground up
• Operation can be learned independently in a few hours following video courses
• The P-System connectors and the Lamello Cabineo are integrated into the software
• Interface for transferring machining data to CNC included
• Test version available for one month, including data for CNC

SmartWOP
Tibek CNC-Technik GmbH
Gutenbergstrasse 39
DE-40235 Düsseldorf

www.smartwop.de

SmartWOP: "Clever, simple and fast" 

• 3D CAD, cabinet unit generator and has interfaces to ERP programs and WOP
• SmartWOP makes it possible to design furniture very quickly, both as a single order and as a series order, using drag-and-drop
• The P-System connectors, the 4 mm wooden biscuits and the Lamello Cabineo are stored in the fittings and machining library and are automatically positioned to the depth and thickness of the connection
• The CNC connection is used to export the designs as finished CNC programs for the CNC machines
• Special volumes are available for knee wall cabinet, jamb wall cabinet and corner cabinet applications

BrainSoftware srl
Via Roma 25/a
IT-31010 Fonte TV

www.spazio3d.com

3D CAD-CAM Software for efficient planning of Lamello products

P-System connector / machining

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for Tenso P-14
• Connector and profile groove/drill hole for Divario P-18
•  Available for WOP and ISO controller

P-System generator for automatic positioning

• Number of connectors
• In the board thickness
• Illustration

P-System machining

• Enabling of macros by CNC manufacturer
• Macros on the CNC machine determine the options
• Machining is possible with the P-System disc cutter

Cabineo connector / Machining

• Connectors and machining for Cabineo: 8 + 12
• Available for WOP and ISO controller

Cabineo generator for automatic positioning

• Number of connectors
• Illustration

Cabineo machining

• Macros enabled by CNC manufacturer

Swiss All CAD AG
Widenstrasse 2
CH-9200 Gossau

www.swissallcad.ch

Software for efficient planning of Lamello products

SWOOD
EFICAD
55 avenue de Melgueil
FR-34280 La Grande Motte

www.swood.eficad.com

SWOOD by EFICAD: "Furniture software from design to manufacture"

• SWOOD Design is a complete CAD software that is fully integrated into SOLIDWORKS
• It makes it quick and easy to design a project in a 3D environment and parametric functions
• The configurator works in a parametric 3D design using drag-and-drop
• The P-System connectors, the 4mm wooden biscuits or the Lamello Cabineo, for example, can be automatically positioned in the depth and thickness of the connection according to parametrically defined rules from the fitting library
• The SWOOD Center Service can be linked to the company's databases (e.g. ERP or MES software)
• The design data can be controlled via SWOOD CAM using post-processors with 3- to 5-axis CNC machines (WOP and ISO interface)

T.P.A. Srl
via Carducci 221
IT-20099 Sesto San Giovanni (MI)

www.tpaspa.com

Tpa - Technologies and products for automation 

tapio GmbH
Karl-Berner-Straße 4
DE-72285 Pfalzgrafenweiler 

www.tapio.one

tapio is intended to help the wood industry to evolve into the digital future itself. A common ecosystem is tapio’s answer to the question “how”. Through tapio companies themselves can shape their digital future.

With tapio machinery manufacturers, toolmakers and material producer use the same technology platform. That way digital solutions for common customers of every size are being discovered. Tapio itself is neutral within this network and considers itself to be a supporter. Customers have the advantage that they rediscover the diversity of their physical world within solutions tapio provides.

Missler Software
254 L’Occitane
FR-31670 Labège

www.topsolid.com

3D CAD-CAM software for efficient planning of Lamello products

P-System connector/Machining

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for Tenso P-14
• Connector and profile groove/Drill hole for Divario P-18
• Connector and profile groove for Bisco P-14, P-10
• Connector must be individually positioned
• Graphic illustration
• Graphic simulation of machining
• Available for WOP and ISO controller
• From version 2013

P-System machining

• Macros enabled by CNC manufacturer
• The macros on the CNC machine determine the options
• Machining is possible with the P-System disc cutter

 Cabineo connector/machining

• Connector and machining for Cabineo 8 + 12
• Connector must be individually positioned
• Graphic illustration
• Graphic simulation of machining
• Available for WOP and ISO controller
• From 2017 version

Cabineo machining:

• Macros enabled by CNC manufacturer
• Macros on the CNC machine define the options

TrunCAD GmbH
Europaplatz 1
DE-88131 Lindau

www.truncad.de

CAM software for efficient planning of Lamello products

P-System Machining

• Macros enabled by CNC manufacturer
• Macros on the CNC machine defines the options
• Profile groove must be positioned individually
• From version 11 (2015)
• Can be purchased with update

Cabineo machining

• Machining as 3x hole
• Automatic positioning of counterbore
• Machining must be positioned individually
• From 2017 version
• Available free with update

extragroup GmbH
Pottkamp 19
DE-48149 Münster

www.extragroup.de

2D / 3D CAD Software

CAM Software VectorWOP

P-System Connector

• Connector and profile groove for Clamex P-14, Medius P 14/10, P-10
• Connector and profile groove for Tenso P-14
• Visualisation in graphs

P-System generator for automatic positioning 

• Number of connectors and distribution
• Positioning in the plate thickness
• Visualisation in graphs
• Surface connections
• 90° corner connections
• Angle bisector mitres at a huge range of angles
• Obtuse-angled mitres at a huge range of angles
• From version 2019

P-System machining

• Triggering the macros provided by the CNC manufacturer
• The macros on the CNC machine determine the possibilities
• Machining possible with the P-System disc cutter
• Interface with WOP
• NC-Export possible with CAM Software VectorWOP

Cabineo connectors / machining

• Connector and machining for Cabineo 8 + 12
• As a triple hole
• As a groove with an exterior contour
• The connector can be positioned individually
• Visualisation in graphs

Cabineo generator for automatic positioning 

• Number of connectors and distribution
• Positioning within the panel thickness
• Grafische Darstellung
• 90° Eckverbindungen
• Ab Version 2020

Cabineo machining

• Interface for WOP
• NC-Export possible with CAM Software VectorWOP

Quality Industriale srl 
Via Vittorio Emanuele II, 35
IT-12048 Sommariva del Bosco 

www.woodlabstudio.com

woodlab STUDIO: simple, fast, effective 3D design

• A single solution that integrates parametric 3D design, CAM for CNC (ISO and WOP), optimizer, nesting. Integrates with ERP and MES
• Drag and drop functions make volume design easy, fast, intuitive. Special and free design volumes allow you to design any type of furniture 
• Hardware libraries include Lamello's P-System and Cabineo joints
• The hardware libraries are dynamic and complete with all the machining operations and parameters needed to prepare CNC programs
• The integrated CAM automates and speeds up the creation of programs for CNC machining centers

xCAD Solutions GmbH
Münzenbergstraße 10
AT- 8700 Leoben

www.xcad.at

xCAD Interior - Efficient planning in 3D