Lamello
Verbindungstechnik
Lamello
Finder Tools
Connector Finder P-System Configurator

Cabineo 8 / Cabineo 12

Time-saving furniture connector without edge drilling and with very high clamping force
Holz verbinden

Description

Cabineo is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high clamping force which leads to stable connections without the need for additional dowels. Cabineo is available in white or black.

Buy product

186305
Cabineo Starter Set
  • Cabineo 8 + 12 (40 pcs each)
  • Cabineo hex bit
  • Cover caps (40 pcs)
186310
Cabineo 8, for dividing panels from 16 mm, 500 pcs
186311
Cabineo 8, for dividing panels from 16 mm, 2000 pcs
186320
Cabineo 12, 500 pcs
186321
Cabineo 12, 2000 pcs
276312
Cabineo hex bit
136312
Cabineo drill Ø 15 mm with short centering point 0.8 mm
136310
Cabineo cutter Ø 10 mm
136311
Cabineo cutter Ø 12 mm
256300
Cabineo tool with handle
186330
Cabineo 12 black, 500 pcs
186331
Cabineo 12 black, 2000 pcs
186340
Cabineo 8 black, 500 pcs
186341
Cabineo 8 black, 2000 pcs
276308
Cabineo hex drive with 1/4" bit Sw 4 GL 80mm
276309
Cabineo hex drive with 1/4" bit 100 pcs Sw 4 GL 80mm
136314
Cabineo drills for aggregate Ø 15 mm RL carbide tipped
136315
Cabineo drills for aggregate Ø 15 mm LL carbide tipped
Buy now To notepad

Product information

For all CNC machines

Surface machining without addtional drill holes in the edge for wooden dowels. Therefore the maching is possible on simple 3 axis CNC machines also.

Drilling or cutting

The workpiece can be machined either using a drill or a cutter.

Reduced to the essentials

The one-part connector features high clamping force and does not require any additional alignment elements such as wood dowels.

Technical information

Size (mm):
33.8 x 16.5 x 10.8 mm
Cutter:
ø 12 mm or smaller
Drill:
ø 5 mm and ø 15 mm
Material connector:
Fibreglass reinforced plastic
Installation tolerance:
Longitudinal ± 0.1 mm
Tensile strength:
~ 900 N ≈ 90 kg

Technical documentation and video

Flyer:

Overview Drilling System connectors (952 KB)
Drilling System Brochure (3 MB)

Videos:

Cabineo CNC Connector (MP4) (10 MB)
Cabineo Processing Methods (MP4) (32 MB)
Cabineo: Quick Cabinet Assembly (MP4) (35 MB)
Lamello Introvideo Cabineo (25 MB)

Catalogue:

Lamello Catalogue (21 MB)

Manual:

Manual Cabineo (2 MB)

Technical data:

Cabineo Flush with the surface DXF (583 KB)
Cabineo 3D DXF (49 KB)
Cabineo HPL on the surface DXF (354 KB)
Cabineo Flush cover cap DXF (362 KB)
Cabineo Insert 3D DXF (95 KB)
Cabineo on the surface DXF (355 KB)
Machining Cabineo (952 KB)

Corresponding system products

Cabineo tool with handle

For connecting the workpieces by hand

Wishlist add/remove

Cabineo hex bit

For connecting the workpieces with the cordless screwdriver

Wishlist add/remove

Cabineo Cover caps

Aesthetic with cover caps in various colors

Read more

Cabineo cutter Ø 10 mm

To machining the Cabineo with a cutter

Wishlist add/remove

Cabineo Cutter Ø 12 mm

To machining the Cabineo with a cutter

Wishlist add/remove

Cabineo drill Ø 15 mm

To machining the Cabineo with a drill

Wishlist add/remove